YITD IRON THREADED Y STRAINERS

The Model YITD is a made in the USA iron Y strainer (wye strainer) that can be used in applications for steam, water, oil, or gas where protection from foreign matter in a pipeline is required.  The YITD1 is 300# class.

They are constructed from cast iron, and have female NPT thread ends.   Perforated 304 stainless steel screens are welded along the seam for maximum strength.  If the media is not specified, screens for steam will be supplied.  Options include epoxy coating and galvanizing, and the addition of magnets. 

Non-Shock Working Pressure for the YITD is 450psi at 650F for steam, 640psi at 100F for water, oil, and gas (WOG).

These strainers self-clean by opening the drain plug connected to the blow-off port.  See the maintenance instructions for more detailed information on servicing the strainer, and the submittal sheet for additional technical data.

MODEL
SIZE
(in)
ENDS
CLASS
PRESS (STEAM)
(psi)
PRESS (WOG)
(psi)
WT
(lbs)
A
(in)
B
(in)
E
(in)
ITEM NO
 YITD   1/2   THREAD   300   450   640   2   3   2-5/8   3/8   YITD050 
 YITD   3/4   THREAD   300   450   640   3   4   3-5/8   1/2   YITD075 
 YITD   1   THREAD   300   450   640   4.5   4-7/8   4-1/2   3/4   YITD100 
 YITD   1-1/4   THREAD   300   450   640   5   5-1/8   4-3/4   3/4   YITD125 
 YITD   1-1/2   THREAD   300   450   640   8   5-3/4   4-7/8   1   YITD150 
 YITD   2   THREAD   300   450   640   15   7-1/4   5-3/4   1-1/4   YITD200